Standard Custom Short Shield comes in your choice of Cerakote Armor Black or Raw. Add Custom CeraKote colors for $35.00. Check out the color tab at the bottom for color swatches. ***Not compatible with the Freedom handguard, Slim handguards, DOLOS System or .308 Barrel Nuts.
Add some color under your Unique-ARs handguard. The short shield is made to slide under handguard and over the 556 castle bolt, and is attached using a end cap. End cap is attached with two screws inserted in the foremost tac rail holes at the 12 and 6 o’clock positions. Will not work with handguards that have an upgraded front end cut. Handguard length, length of gas tube, and color specification required. Sprocket end cap will accept barrels up to 0.95″ in diameter. **Short shield only works with our 556 barrel nut and low profile gas blocks.
***Not compatible with the Freedom handguard, Slim handguards, DOLOS System or .308 Barrel Nuts.
****Not suggested for handguards with a breach front end such as One Shot or Swords.
Pocket length for gas block on short shields are as follows:
Pistol 5.5″ from the face of the upper.
Carbine 8.5″ from the face of the upper.
Midlength 10.5″ from the face of the upper.
Rifle length 13.5″ from the face of the upper.
Unique-ARs provides a lifetime limited warranty on all free float forends and tac rail. We warranty all materials and finishes will be free from defect. We want you to be more then satisfied with your precision parts and our customer service. We will do our best to make your experience dealing with our company a positive one, however we do not cover stripped or abused parts. Give us a call if you have any questions 888.982.8386.
Stock items may be returned at the shipping expense of the customer. A refund for the cost of the product only, minus a 10% re-stocking fee will be issued if the item shows no signs of wear or installation and can be resold as new. Shipping costs will not be refunded. We do not offer refunds on custom work including custom or upgraded paint options. A partial refund will be given on stock items with custom paint if the item can be resold as new.
Unique-ARs guarantees that you will receive the highest quality Cerakote painted handguard. Below is about the time periods that you can expect until your items ship:
Armor Black or Raw: ships in 3-5 business days
Single color: ships in 7-10 business days
Two or more colors: ships in 10+ business days
For Custom and Private Label Anodizing please allow an additional 4-8 weeks after the time of approval.
Raw or single color Cerakote Armor Black is included in the cost of the handguard(s). Anodized Black may affect production time and cost. There is a charge for Armor Black when in conjunction with any other color.
Each Cerakote color requires its own process, therefore we must charge for each color, including Armor Black when in conjunction with any other color.
*Bright Purple is available as a single color only*
For a full color chart please visit: http://www.cerakoteguncoatings.com/finishes/?tab=coatings&cat=HSERIES *Please Note: Every effort has been made to accurately represent the colors shown in this catalog. Colors may vary upon lighting conditions. Due to limitations of the printing process, photographic and printed images may not represent true color.
Grip installation instructions
1.Make sure weapon is unloaded.
Remove upper receiver from the weapon and turn lower receiver upside-down.
Using armory guidelines, remove existing grip from weapon making sure not to lose selector spring that will be exposed when the grip is removed.
Remove selector spring from the old grip and insert into Unique-Grips. A small dab of grease on in the spring hole can help keep the spring retained in the Grip.
Slip Unique-Grip onto lower receiver use D-ring on Unique-grip to lightly tighten the bolt onto receiver making sure that selector spring slides into detent hole.
Once the Unique-Grips bolt is lightly tightened squeeze grip to form comfortable shape for your hand. Tighten bolt until grip retains desired shape. This step can be repeated until the Unique-Grip is a perfect fit for you.
A couple of extra turns with a screwdriver will ensure grip does not change shapes. Don’t over tighten damage to receiver may occur.
Test function of the selector after installation prior to test firing.
Test fire the weapon prior to use in operational environments.